KV-32XBR400/36XBR400/36XBR400H/38DRC1/38DRC1C
Connecting a DVD Player with Component
Video Connectors
1
Using three separate component video cables, connect the DVD
player's Y, P
✍
The Y, P
, and P
B
Y, B-Y, and R-Y. If so, connect the cables to like colors.
The Y, P
, and P
B
provide sound.
2
Using an audio cable, connect the DVD player's audio OUT jacks
to the TV's audio IN jacks.
DVD player
Connecting a Digital TV Receiver
1
Using three separate component video cables, connect the Digital
TV Set-top box's Y, P
z
Be sure to read the
✍
The Y, P
, and P
manual for the Set-top box.
B
provide sound.
Component input (Y, P
may also use component video or S Video connections.
2
Using an audio cable, connect the DTV Set-top box's audio OUT
jacks to the TV's audio IN jacks.
DTV Set-top box
VIDEO
1
2
3
Y
S VIDEO
P
B
(MONO)
P
R
VIDEO
AUDIO/VIDEO OUT
AUDIO-R (red)
AUDIO-L (white)
Connecting a Camcorder
1
Using A/V cables, connect the camcorder's A/V OUT jacks to
the TV's A/V IN jacks.
✍
If you have a mono camcorder, connect its left audio output to the TV's AUDIO L jack.
For easy connection of the camcorder, the TV has front A/V inputs (shown below).
However, if you prefer, you can also connect the camcorder to the TV's rear A/V IN jacks.
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
Installing the TV
, and P
jacks to the Y, P
, and P
jacks on the TV.
B
R
B
R
jacks on your DVD player are sometimes labeled Y, C
, and C
, or
R
B
R
jacks do not provide audio, so audio cables must be connected to
R
Component video cables
TV
AUDIO-R (red)
AUDIO-L (white)
Audio cable
15
Installing the TV
, and P
jacks to the TV.
B
R
jacks do not provide audio, so audio cables must be connected to
R
, and P
) is recommended for optimum picture quality. You
B
R
Component video cables
TV
Audio cable
MENU
A/V output
17
Installing the TV
Connecting a DVD Player with A/V Connectors
✍
1
2
DVD player
16
Installing the TV
Using the CONTROL S Feature
CONTROL S allows you to control your TV system and other Sony
equipment with one remote control.
To control your other Sony equipment with your TV's remote control,
use a CONTROL S cable (not supplied) to connect the equipment's
CONTROL S IN jack to the TV's CONTROL S OUT jack.
TV
Setting Up the TV Automatically
After you finish connecting your TV, you need to run Auto Setup to
set up your channels.
✍
1
Using Auto Setup
2
✍
18
— 10 —
If your DVD player has video component output connectors: for best picture quality use
the connection described on page 15.
Using audio cables, connect the DVD player's audio OUT jacks to
the TV's audio IN jacks.
Using an S VIDEO cable, connect the DVD player's S VIDEO jack
to the TV's S VIDEO jack.
TV
S VIDEO
cable
AUDIO-R (red)
AUDIO-L (white)
Audio cable
The Auto Setup feature does not apply for installations that use a cable box for all
channel selection.
Press
POWER
to turn on the TV.
The first time you turn on the TV, the Auto Setup screen appears.
Press
CH+
to run Auto Setup or press
CH–
to exit.
You can run Auto Program by selecting it in the Channel menu, as described on
page 30.