2-1. REAR COVER REMOVAL
*
*
2-2. CHASSIS ASSEMBLY REMOVAL
Lift lever up on right and left
sides of chassis bracket
and pull chassis assembly
gently away from bezel.
KV-32XBR400/36XBR400/36XBR400H/38DRC1/38DRC1C
SECTION 2
DISASSEMBLY
2-3. SERVICE POSITION
CAUTION!
Heat sink on IC5004 is -15V.
Care must be taken not to
allow heat sink to touch any
other components.
— 13 —
*
Remove +BVTP 4x16 screws from areas
indicated with a circle.
* = screws for 36" and 38" models only.
*
Pull up and rotate A and D Boards
to service the set.