Connecting A Dvd Player With Component Video Connectors; Connecting A Dvd Player With Component Video - Sony WEGA KV 36FS13 Operating Instructions Manual

Connecting a DVD Player with Component
Video Connectors
DVD player
This is the preferred hookup to use if your DVD player has
component video (Y, P
1
Using three separate component video cables, connect the DVD
player's Y, P and P
B
the VIDEO 4 connections.
The Y, P and P
B R
C , or Y, B-Y and R-Y. If so, connect the cables to like colors.
R
2
Using an audio cable, connect the DVD player's Audio OUT jacks
to the TV's Audio IN jacks. Be sure to use the same column
(VIDEO 4) of inputs that you used for the video connection.
Component video cables
Audio cable
You cannot record the signal from any equipment connected into the Y, P
jacks.
, P ) jacks.
B R
jacks to the Y, P and P
R B
jacks on your DVD player are sometimes labeled Y, C
TV
Installing the TV
jacks on the TV. Use
R
and
B
AUDIO-R (red)
AUDIO-L (white)
, P
B R
25