BenQ Joybee GP3 User Manual page 88

FUNCTION
Wi-Fi Mode
Device Name
Security
Encryption
Key
Show
Encryption
Key
Wi-Fi Mode
Wi-Fi
Connection
Configure
88
Operation
DESCRIPTION
Displays AP Mode network settings.
See "Using Wireless Streaming" on page 73
Allows you to input total 30 characters (only a-z , A-Z , _ , - are
allowed) for the device name /SSID. Select Device Name and press
OK to open a virtual keyboard in full screen. Once Device Name is
set, select Enter in the virtual keyboard and press OK to return to
Network setting.
Allows you to set WPA or WPA2 security modes. Select one of the
two encryption modes, and set the encryption key accordingly.
Allows you to input 8-20 ASCII characters for WPA-PSK or WPA2-
PSK encryption mode. Select Encryption Key and press OK to open
a virtual keyboard in full screen. You can input the encryption key
using the virtual keyboard. Once Encryption Key is set, select Enter
in the virtual keyboard and press OK to return to Network setting.
If you want to see the encryption key after input the encryption key,
you can select "Yes" in Show Encryption key item. By default, the
encryption key is not shown.
Displays Client Mode network settings.
See "Using Wireless Streaming" on page 73
Displays Wi-Fi connection status. Press OK to display AP list menu.
Displays IP configure pop-up menu. By default, it automatically
requests an IP address via DHCP. If you select "Yes" in Manually
assign IP, you can set IP Address, Netmask, Gateway and DNS
manually using a virtual keyboard in the screen.
The format of "IP address", "Netmask", "Gateway" and "DNS"
should follow 0-255.0-2550-255.0-255.
for details.
for details.