Aiphone JB-2MED Installation & Operation Manual page 7

3-2
#1
(PR)
[1]
E
(BL)
SW
P
(GR)
b2
(YE)
b1
[3]
(OG)
V -
V +
(RD)
[4]
(BR)
#2
L
(BR)
[5]
L
(RD)
(OG)
c1 sensor
(YE)
c2
∗ PR: Purple ∗ PR: Purple ∗ PR: Purple
BL: Blue BL: Blue BL: Blue
GR: Green GR: Green GR: Green
YE: Yellow YE: Yellow YE: Yellow
OR: Orange OR: Orange OR: Orange
RD: Red RD: Red RD: Red
BR: Brown BR: Brown BR: Brown
Options
[1] Foot switch
Connect a locally available pedal foot switch to PURPLE and
BLUE wires (dry closure contact).
[2] Manual Press-to-Talk restriction
Short PURPLE and GREEN wires together to prevent manual
TALK button operation.
[3] Selective door release
Please refer to the wiring diagram #9 for detail connection.
[4] Video output to video monitor, video switcher, etc. (NTSC, 1 Vp-
p, 75W)
[5] Single door release
Connect BROWN and RED wires from connector #2 to a single
door release (or to the RY-3DL as shown on the wiring diagram).
NOTES: 1. For JB-2HD, only functions [1] and [2] are available.
2. Cut off unused wires and insulate the ends to prevent
shorting.
3. Provide a box deep enough to accommodate all cables
including options.
Options
[1] Foot switch
Connect a locally available pedal foot switch to PURPLE and
BLUE wires (dry closure contact).
[2] Manual Press-to-Talk restriction
Short PURPLE and GREEN wires together to prevent manual
TALK button operation.
[3] Selective door release
Please refer to the wiring diagram #9 for detail connection.
[4] Video output to video monitor, video switcher, etc. (NTSC, 1 Vp-
p, 75W)
[5] Single door release
Connect BROWN and RED wires from connector #2 to a single
door release (or to the RY-3DL as shown on the wiring diagram).
NOTES: 1. For JB-2HD, only functions [1] and [2] are available.
2. Cut off unused wires and insulate the ends to prevent
shorting.
3. Provide a box deep enough to accommodate all cables
including options.
#2 #1
JB-2M(E)D
[2]
#1
JB-2HD
∗ PR: Purple ∗ PR: Purple
BL: Blue BL: Blue
GR: Green GR: Green
YE: Yellow YE: Yellow
OR: Orange OR: Orange
RD: Red RD: Red
BR: Brown BR: Brown
English
Français
Options
[1] Foot switch
Connect a locally available pedal foot switch to PURPLE and
BLUE wires (dry closure contact).
[2] Manual Press-to-Talk restriction
Short PURPLE and GREEN wires together to prevent manual
TALK button operation.
[3] Selective door release
Please refer to the wiring diagram #9 for detail connection.
[4] Video output to video monitor, video switcher, etc. (NTSC, 1 Vp-
p, 75W)
[5] Single door release
Connect BROWN and RED wires from connector #2 to a single
door release (or to the RY-3DL as shown on the wiring diagram).
NOTES: 1. For JB-2HD, only functions [1] and [2] are available.
2. Cut off unused wires and insulate the ends to prevent
shorting.
3. Provide a box deep enough to accommodate all cables
including options.
Options
[1] Foot switch
Connect a locally available pedal foot switch to PURPLE and
BLUE wires (dry closure contact).
[2] Manual Press-to-Talk restriction
Short PURPLE and GREEN wires together to prevent manual
TALK button operation.
[3] Selective door release
Please refer to the wiring diagram #9 for detail connection.
[4] Video output to video monitor, video switcher, etc. (NTSC, 1 Vp-
p, 75W)
[5] Single door release
Connect BROWN and RED wires from connector #2 to a single
door release (or to the RY-3DL as shown on the wiring diagram).
NOTES: 1. For JB-2HD, only functions [1] and [2] are available.
2. Cut off unused wires and insulate the ends to prevent
shorting.
3. Provide a box deep enough to accommodate all cables
including options.
Options
[1] Foot switch
Connect a locally available pedal foot switch to PURPLE and
BLUE wires (dry closure contact).
[2] Manual Press-to-Talk restriction
Short PURPLE and GREEN wires together to prevent manual
TALK button operation.
[3] Selective door release
Please refer to the wiring diagram #9 for detail connection.
[4] Video output to video monitor, video switcher, etc. (NTSC, 1 Vp-
p, 75W)
[5] Single door release
Connect BROWN and RED wires from connector #2 to a single
door release (or to the RY-3DL as shown on the wiring diagram).
NOTES: 1. For JB-2HD, only functions [1] and [2] are available.
2. Cut off unused wires and insulate the ends to prevent
shorting.
3. Provide a box deep enough to accommodate all cables
including options.
- 7 -
Deutsch
Español
Nederlands