Aiphone JB-2MED Installation & Operation Manual page 22

Erase
1. Use the play operation to display the picture you wish to erase. (P20)
Push the SET button and REC button simultaneously for 2 sec. to
erase.
2. The picture to be erased is deleted, and the next picture will be
displayed. When the next picture is displayed, let go of the button.
1. Erase operations will also erase saved pictures.
2. Once a picture is erased, it cannot be restored.
3. It is not possible to delete only a single sub screen of a 4-frame
picture recorded in 16-picture/4-frame mode.
4. To erase all of the pictures, change recording mode in the
settings. This will erase all of the pictures recorded up to that
point. (P12)
Erase
1. Use the play operation to display the picture you wish to erase. (P20)
Push the SET button and REC button simultaneously for 2 sec. to
erase.
2. The picture to be erased is deleted, and the next picture will be
displayed. When the next picture is displayed, let go of the button.
1. Erase operations will also erase saved pictures.
2. Once a picture is erased, it cannot be restored.
3. It is not possible to delete only a single sub screen of a 4-frame
picture recorded in 16-picture/4-frame mode.
4. To erase all of the pictures, change recording mode in the
settings. This will erase all of the pictures recorded up to that
point. (P12)
Erase
1. Use the play operation to display the picture you wish to erase. (P20)
Push the SET button and REC button simultaneously for 2 sec. to
erase.
2. The picture to be erased is deleted, and the next picture will be
displayed. When the next picture is displayed, let go of the button.
1. Erase operations will also erase saved pictures.
2. Once a picture is erased, it cannot be restored.
3. It is not possible to delete only a single sub screen of a 4-frame
picture recorded in 16-picture/4-frame mode.
4. To erase all of the pictures, change recording mode in the
settings. This will erase all of the pictures recorded up to that
point. (P12)
SURVEILLANCE SETTING
8
SURVEILLANCE SETTING
SURVEILLANCE SETTING
SURVEILLANCE SETTING
SURVEILLANCE SETTING
If a sensor light is installed (local product)
1. If something is detected by the sensor (locally available product),
an alarm goes off with a sound and a warning screen. If more than
1 min. has passed after the absence set (auto absence recording)
was set, motion detection will be in operation.
2. Press the TALK button to restore. (Automatic restoration after
approx. 30 sec.)
NOTES: 1. In step 1, the length of time that the alarm sounds can be
changed. (P12)
2. Press the TALK button to stop the alarm and warning screen.
3. Communication with the sensor light is not possible.
4. If the absence set (auto absence recording) is cancelled,
the sensor light does not call the unit, but the sensor light
continues with its surveillance function.
Deutsch
1. Read the instruction manual for the sensor light (local product),
or contact your local installer or dealer.
If a sensor light is installed (local product)
1. If something is detected by the sensor (locally available product),
an alarm goes off with a sound and a warning screen. If more than
1 min. has passed after the absence set (auto absence recording)
was set, motion detection will be in operation.
2. Press the TALK button to restore. (Automatic restoration after
approx. 30 sec.)
Español NOTES: 1. In step 1, the length of time that the alarm sounds can be
1. Read the instruction manual for the sensor light (local product),
or contact your local installer or dealer.
If a sensor light is installed (local product)
Nederlands
1. If something is detected by the sensor (locally available product),
an alarm goes off with a sound and a warning screen. If more than
1 min. has passed after the absence set (auto absence recording)
was set, motion detection will be in operation.
2. Press the TALK button to restore. (Automatic restoration after
approx. 30 sec.)
NOTES: 1. In step 1, the length of time that the alarm sounds can be
1. Read the instruction manual for the sensor light (local product),
or contact your local installer or dealer.
If a sensor light is installed (local product)
1. If something is detected by the sensor (locally available product),
an alarm goes off with a sound and a warning screen. If more than
1 min. has passed after the absence set (auto absence recording)
was set, motion detection will be in operation.
2. Press the TALK button to restore. (Automatic restoration after
approx. 30 sec.)
NOTES: 1. In step 1, the length of time that the alarm sounds can be
English
1. Read the instruction manual for the sensor light (local product),
or contact your local installer or dealer.
- 22 -
• In calling and communication, sensored alarm does not
come out.
• Also the alarm does not come out through Sub room
master station(s).
changed. (P12)
2. Press the TALK button to stop the alarm and warning screen.
3. Communication with the sensor light is not possible.
4. If the absence set (auto absence recording) is cancelled,
the sensor light does not call the unit, but the sensor light
continues with its surveillance function.
• In calling and communication, sensored alarm does not
come out.
• Also the alarm does not come out through Sub room
master station(s).
changed. (P12)
2. Press the TALK button to stop the alarm and warning screen.
3. Communication with the sensor light is not possible.
4. If the absence set (auto absence recording) is cancelled,
the sensor light does not call the unit, but the sensor light
continues with its surveillance function.
• In calling and communication, sensored alarm does not
come out.
• Also the alarm does not come out through Sub room
master station(s).
changed. (P12)
2. Press the TALK button to stop the alarm and warning screen.
3. Communication with the sensor light is not possible.
4. If the absence set (auto absence recording) is cancelled,
the sensor light does not call the unit, but the sensor light
continues with its surveillance function.
• In calling and communication, sensored alarm does not
come out.
• Also the alarm does not come out through Sub room
master station(s).
Français
Deutsch
Español