ActionTec V1000H User Manual page 25

Vdsl2/gige wireless 11n gateway

Hide thumbs Also See for V1000H:

Table of Contents

To set up WPS:

Enable WPS by clicking in the Enable radio button.

Apply to save your changes.

Click

If connecting a device to the wireless network with a WPS AP PIN, write down

the PIN displayed after Current WPS AP Pin, then enter the PIN in the device's

WPS AP PIN configuration.

If connecting a device to the wireless network with PBC (Push Button

the device within two minutes.

If the connecting device uses the End Device PIN method, enter the PIN in the

VDSL2/GigE Wireless 11n Gateway

Connect, then press the PBC-compatible button on

Table of Contents