Table of Contents
Advertisement
Section
Using this unit
02
Local seek tuning allows you to tune in to only
those radio stations with sufficiently strong sig-
nals for good reception.
1 Press M.C. to display the setting mode.
2 Press M.C. to turn local on or off.
3 Turn M.C. to select the desired setting.
FM: Level 1 Level 2 Level 3 Level 4
AM: Level 1 Level 2
The highest level setting allows reception of
only the strongest stations, while lower levels
allow the reception of weaker stations.
Seek mode (seek mode)
Seek tuning setting can be changed between digi-
tal station seek (Seek HD) and all station seek
(Seek ALL) depending on the reception status.
1 Press M.C. to select the desired setting.
Seek ALL Seek HD
Blending (reception mode)
If a digital broadcast reception condition gets
poor, this unit automatically switches to the ana-
log broadcast of the same frequency level. If this
function is set to on, the tuner switches between
digital broadcast and analog broadcast automati-
cally. If this function is off, reception will be con-
ducted within an analog broadcast.
1 Press M.C. to turn this function on or off.
Note
If Seek mode is set to Seek HD and Blending is
set to off, the tuner cannot receive broadcasts.
In this case, the seek mode or reception mode is
changed automatically as follows:
! When Seek mode is set to Seek HD, if you
switch Blending from on to off, Seek mode is
changed to Seek ALL.
! When Blending is set to off, if you switch
Seek mode from Seek ALL to Seek HD,
Blending is changed to on.
8
En
Tuner
Only for DEH-X8500BS and DEH-X7500S
Basic operations
1
2
3
4
5
6
RDS
1
2
3
4
5
7
Non-RDS or AM
1 Band indicator
2 5 (stereo) indicator
3 LOC indicator
Appears when local seek tuning is on.
4 Preset number indicator
5 Signal level indicator
6 Program service name
7 Frequency indicator
Selecting a band
1 Press BAND/
until the desired band (FM-1,
FM-2,FM-3 for FM or AM) is displayed.
Manual tuning (step by step)
1 Turn LEVER.
! Select Manual (manual tuning) under Tuning
Mode to use this function. For details about
the settings, refer to Tuning Mode (LEVER tun-
ing setting) on this page.
Using this unit
Switching preset stations
1 Turn LEVER.
! Select Preset (preset channel) under Tuning
Mode to use this function. For details about
the settings, refer to Tuning Mode (LEVER tun-
ing setting) on this page.
Seeking
1 Turn and hold down LEVER.
! While turning and holding down LEVER,
you can skip stations. Seek tuning starts
as soon as you release LEVER.
Storing and recalling stations
for each band
For details, refer to Storing and recalling stations
for each band on the previous page.
Switching the display
Selecting the desired text information
% Press
/DISP.
Program service name (frequency) artist
name/song title
Notes
! If the program service name cannot be ac-
quired, the broadcast frequency is displayed
instead. If the program service name is de-
tected, the program service name will be dis-
played.
! Depending on the band, text information can
be changed.
Function settings
1
Press M.C. to display the main menu.
2
Turn M.C. to change the menu option
and press to select FUNCTION.
3
Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
BSM (best stations memory)
BSM (best stations memory) automatically stores
the six strongest stations in the order of their sig-
nal strength.
1 Press M.C. to turn BSM on.
To cancel, press M.C. again.
Local (local seek tuning)
Local seek tuning allows you to tune in to only
those radio stations with sufficiently strong sig-
nals for good reception.
1 Press M.C. to display the setting mode.
2 Press M.C. to turn local on or off.
3 Turn M.C. to select the desired setting.
FM: Level 1 Level 2 Level 3 Level 4
AM: Level 1 Level 2
The highest level setting allows reception of
only the strongest stations, while lower levels
allow the reception of weaker stations.
Tuning Mode (LEVER tuning setting)
You can assign a function to the LEVER on the
unit.
Select Manual (manual tuning) to tune up or
down manually or select Preset (preset channel)
to switch between preset channels.
1 Press M.C. to select Manual or Preset.
Hide quick links:
Advertisement
Table of Contents
