Ch-Pro3 (Solid State Programmable Digital Control) - Blodgett CTB SERIES Installation & Operation Manual

Operation

CH-Pro3 (Solid State Programmable Digital Control)

1
2
4
5
6
8
9
11
13
14
Figure 12
COMPONENT DESCRIPTION
1. SELECTOR SWITCH --- turns power to the
oven on or off. Allows selection of cook or cool
down modes and fan speed (if applicable).
2. TIME DISPLAY --- gives cook time.
3. TIME ARROW KEYS --- press to enter cook and/
or pulse times.
4. READY INDICATOR --- when lit indicates the
oven has reached the setpoint temperature
and product may be loaded.
5. TEMPERATURE DISPLAY --- gives cook and
hold temperatures.
6. HEAT INDICATOR --- when lit indicates the
oven is heating.
7. TEMPERATURE ARROW KEYS --- press to en-
ter cook and hold temperatures.
8. HOLD KEY --- turns hold mode on or off.
9. TEMP KEY --- press to display actual oven
temperature.
10. FAN KEY --- turns pulse mode on or off. The
3
LED above the fan key is always on.
11. PRODUCT KEYS --- three programmable keys.
7
12. MANUAL PRODUCT KEY --- default product key
used for manual operation.
10
13. START KEY --- press to begin a cook cycle.
14. PROGRAM KEY --- press to enter program-
12
ming mode and save programmed settings.
15
15. STOP KEY --- press to silence audible alarms
and cancel cook cycles.
18