Cruise Control; Automatic Transmission - Chevrolet Impala Getting To Know Manual

Setting Cruise Control
1. Press the On/Off button. The
Cruise Control symbol will illuminate in
white on the instrument cluster.
2. When traveling at the desired speed,
press the SET– button to set the speed.
The symbol will illuminate in green
on the instrument cluster.
Driver Shift Control
Driver Shift Control allows the driver to shift gears manually. The transmission will remain
in the driver-selected gear.
F Optional equipment

CRUISE CONTROL

Adjusting Cruise Control
RES+ Resume/Accelerate
Press to resume a set speed.
When the system is active, press once to
increase speed 1 mph; press and hold to
continue to increase speed.
SET– Set/Coast
When the system is active, press once to
decrease speed 1 mph; press and hold to
continue to decrease speed.
GAP Follow Distance Gap
Collision Alert
Press to select a setting of Far, Medium,
Near or Off.
Cancel
Press to cancel the cruise control without
erasing the set speed from memory.
Pressing the brake pedal also will cancel
the cruise control.
The cruise control set speed is erased
when cruise control or the vehicle ignition
is turned off.
See Driving and Operating in your Owner Manual.

AUTOMATIC TRANSMISSION

1. Move the shift lever to the Manual (M)
position.
2 Press the + (plus) or – (minus) button
on the top of the shift lever to upshift or
downshift. The current gear will be dis-
played on the Driver Information Center.
If vehicle speed is too high or too low for
the requested gear, the shift will not occur.
When coming to a stop, the transmission
will automatically shift to 1st gear.
See Driving and Operating in your Owner Manual.
/
F
F
13