Power Seats; Memory Features; Tilt/Telescope Steering Wheel - Chevrolet Impala Getting To Know Manual

POWER SEATS

A B

MEMORY FEATURES

Set Memory Positions
1. Adjust the driver's seat, power outside mirrors and the power steering column
desired positions.
2. Press and hold the SET button and button 1 at the same time until a beep sounds.
3. Repeat the steps using button 2 for a second driver.
Set Exit Position
1. Adjust the driver's seat, power outside mirrors and the power steering column
desired positions.
2. Press and hold the SET button and
sounds.
Recall Positions
At any time, press and hold button 1, 2 or
Releasing the button before the stored position is reached cancels the recall.
With the vehicle in Park and the ignition ON, press and release button 1, 2 or
recall the stored position.
Note: Open Comfort and Convenience in the Vehicle Settings menu to change the memory
recall settings.

TILT/TELESCOPE STEERING WHEEL

With the vehicle parked, push down the lever on the left side of the steering column to
adjust the position of the steering wheel. The steering wheel can then be moved up or
down and in or out. Pull up the lever to lock the steering wheel in place.
F Optional equipment
6
F
C
F
A. Seat Adjustment
Move the front horizontal control to
move the seat forward or rearward, or to
tilt, raise or lower the seat.
B. Seatback Recline Adjustment
Move the vertical control to recline or
raise the seatback.
C. 4-way Lumbar Adjustment
Press the rear control to adjust the
lumbar support.
See Seats and Restraints in your Owner Manual.
EXIT button on the driver's door until a beep
until the stored position is reached.
See Seats and Restraints in your Owner Manual.
See Instruments and Controls in your Owner Manual.
to the
F
to the
F
to