Char-Broil 463270913 Product Manual page 19

Under sideburner shelf, attach sideburner ignitor wire to electrode, shown A. Place sideburner grate onto
11
sideburner shelf, aligning grate legs with holes in shelf, shown B.
A
Sideburner Ignitor Wire
Insert front brace under control panel and between cart panels. Make sure door hinge pin is on the top side and
12
facing the front. Secure front brace in upper holes using one 1/4-20x1½" screw and Fiber washer on each side.
Secure front brace in lower holes using one 1/4-20x1½" screw on each side.
NOTE: MAKE SURE THAT THE FRONT BRACE IS MOUNTED IN THE MOST DOWNWARD POSITION WHEN
ASSEMBLED TO CART.
Electrode
control panel
Front brace
Fiber washer
Door hinge
pin
B
Sideburner grate
1/4-20x1 ½"
screw
1/4-20x1 ½"
screw
19