Char-Broil 463270913 Product Manual page 15

5
Insert temperature gauge stem into the bigger hole above knob, shown A. Make sure the gauge is pushed in as
far as it will go, then push the gauge downward until it clips into the panel, as shown in B/C.
Temperature gauge
Knob
On back of grill, place upper back panel between side panels. Secure upper back panel in lower holes, using one
6
1/4-20x1½" screw on each side. Do not fully tighten screws until side shelf installation is complete in later
steps.
1/4-20x1 ½" screw
Control panel
Temperature gauge stem
A
B
Back of the panel
C
Upper back panel
15