Husqvarna 42 Workshop Manual page 39

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Remove screw (1), washer (2), filter holder (3),
gasket (4), manifold (5), gasket (6) and screw-
driver guide from carburetor.
(7)
Metering Side
Disassembly
Remove screws (1). Remove metering
diaphragm cover (2) and metering
diaphragm (3).
Connect pressure gauge P/N 5025038-01 to
fuel hose nipple and submerge carburetor in a
container of non-flammable clear solvent. Test
pressure at
50 kPa (7 psi). No leakage
permitted.
www.mymowerparts.com
Fuel System
I
10