Husqvarna 42 Workshop Manual page 22

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
5
Ignition System
20
Using assembling pliers P/N 5025006-01,
make a guide hole in high tension lead.
Insert ignition lead through rubber cover and
install contact spring in guide hole and secure
with assembling pliers. Slide rubber cover over
contact spring.
Removal of the Flywheel
Remove spark plug and thread piston stop P/N
5025033-01 into spark plug hole until tight.
www.mymowerparts.com