Husqvarna 42 Workshop Manual page 37

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Carburetor
-
WARNING -
Never start chain saw without
bar, chain and clutch cover
installed. The clutch could
come loose and cause severe
injury.
Adjustment
Clean air filter and fuel filter before adjusting
carburetor.
There are three adjustment screws on the
carburetor:
L = Low speed screw
H = High speed screw
T = Idle speed screw
Turn screws L and H clockwise until lightly
seated. Turn screw L counterclockwise 1-1/2
turns. Turn screw H counterclockwise 1-1/4
turns.
www.mymowerparts.com
Fuel System
, . , , , _ , . # . . . .
10
e
35