Husqvarna 42 Workshop Manual page 21

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Place air gap gauge P/N 5025134-02
between ignition module and flywheel. Press
ignition module against air gap gauge. Make
sure flywheel magnets are in line with module
and tighten ignition module screws. Remove air
gap gauge.
Connect blue ON/OFF switch lead (1) and red
coil lead (2) to ignition module. Be sure to route
all leads away from flywheel.
Replacement of the Coil
Remove high tension lead from spark plug.
Remove ignition module lead and screws.
Remove coil. Position new coil as shown and
secure with screws. Connect ignition module
lead to coil.
www.mymowerparts.com
Ignition System
5
19