Getting Started Using Online Setup Software - Western Digital My Cloud EX2 User Manual

Back Panel Ethernet (Network) LEDs
The following table describes the network and activity LEDs:
Note: Looking at the port, the LED on the top left is the Activity LED, and the one
on the top right is the Link LED.
State LED
Link down Link
Link up – 10/100 Link
connection
Link up – 10/100/ Link
1000 connection
Link idle Activity
Link busy Activity

Getting Started Using Online Setup Software

The online setup software walks you through the steps necessary to easily connect your
device to your home or small office network. Use the following steps to download and run
the online setup software, discover the device, and get started using your device. The online
setup software is available from WD's Online Learning Center at
http://wd.com/setup/wdmycloudex2.
Downloading and Installing the Online Setup Software
After connecting your device:
1. Open a web browser. (For browser requirements, see "Web Browsers" on page 6. )
2. In the address field, type
to the Learning Center page:
WD MY CLOUD EX2 PERSONAL CLOUD STORAGE
USER MANUAL
Appearance State Description
Off Cable or device is not plugged in, or other
end of link is not operational.
Yellow Cable is plugged in, and both ends of the
link have successfully established
communications. 10/100 network
connection.
Green Cable is plugged in, and both ends of the
link have successfully established
communications. 10/100/1000 network
connection.
Solid Active communication is not in progress.
Green - Blinks Active communication is in progress.
http://wd.com/setup/wdmycloudex2
GETTING STARTED
to display the Welcome
13