Getting Started Using Online Setup Software - Western Digital My Cloud EX2 Ultra User Manual

4. Plug the other end of the power adapter into a power outlet. The unit powers up
automatically.
Important: Wait for the My Cloud EX2 Ultra device to finish powering up
(approximately three minutes) before configuring it. You will know
it is ready when the power LED stops flashing and turns blue.
5. When the power LED on your device turns a solid blue, continue to "Getting Started
Using Online Setup Software" on page 14.

Getting Started Using Online Setup Software

The online setup software walks you through the steps necessary to easily connect your
device to your home or small office network. Use the following steps to download and run
the online setup software, discover the device, and get started using your device. The
online setup software is available from WD's Online Learning Center at
products.wdc.com/.
Downloading and Installing the Online Setup Software
After connecting your device:
1. Open a web browser and type
2. On the Welcome page, click Get Started.
The setup software begins searching for your My Cloud device. When your device is
found, a screen displays showing your device and IP and MAC addresses.
3. Follow the on screen instructions to complete the setup process and install WD Sync.
4. After setup is complete and WD Sync has been installed, a window displays the most
common folders on your computer. Select the folders on your computer that you want
to sync with your My Cloud device and click Next.
5. WD Sync setup is complete. Click Close to exit WD Sync setup.
Note: The WD Sync shortcut might be under Show Hidden Icons in your taskbar.
MY CLOUD EX2 ULTRA PRIVATE CLOUD STORAGE
USER MANUAL
http://mycloud.com/setup
GETTING STARTED
http://
to display the welcome page.
14