System Restore - Western Digital My Cloud EX2 User Manual

System Diagnostics
Run diagnostic tests if you are having problems with your device. There are three types of
diagnostic tests.
 Quick Test: The quick test checks the hard drives for major performance problems.
The result of a quick test is a pass or fail evaluation of the hard drive's condition. The
quick test can take several minutes to complete.

Full Test: The full test is a more comprehensive drive diagnostic. It methodically
tests each and every sector of the hard drives. You will be informed of the condition
of the hard drive once the test is performed. The full test may take hours to
complete, depending on the size and data configuration of the hard drives.
 System Test: The system test reviews the health of your device hardware (hard
drives, fan, system clock, and device temperature).
Running a Diagnostic Test
1. On the Utilities page, click Quick Test, Full Test, or System Test. A progress bar
displays, indicating test progress and whether the device passed or failed the test.
2. Review the test results, and then click Close.

If the device fails the test, click

System Restore

The system restore allows the Administrator to perform a full factory restore on the
WD My Cloud EX2 device. This option restores your device to factory default settings with
no data loss.
Important: Before doing a factory restore or a system update, you may choose to
save your device's current configuration. At a later time, you can import a
previously saved configuration. Keep in mind that importing a
configuration after restoring factory defaults does not restore shares or
users. See "System Configuration," to create or restore a configuration
file.
Note: To erase all of the data on your device, see
1. In the System Restore area, click System Restore.
2. Review the confirmation message, and then click OK.
The device reboots. Don't unplug the device during this rebooting process. Once the
reboot is complete, launch the dashboard.
WD MY CLOUD EX2 PERSONAL CLOUD STORAGE
USER MANUAL
, and then click Support to get assistance.
"Format Disk" on page 128.
CONFIGURING SETTINGS
126