HiSpeed Switch Troubleshooting Guide
VLAN Tips
For each VLAN created with an IP address, an associated entry is also generated.
Therefore, it is critical to verify that these entries exist. If any of the entries are
missing, the system configuration may be corrupted. It is recommended to delete
and re-create the VLAN.. Table 8-1 lists the VLAN entries and Table 8-2 lists
useful CLI commands.
Table 8-1.
Description:
Virtual Port Information
table
Bridge Forwarding
(ARL) table
Routing table
Table 8-2.
/VLAN/SHOW >vlan
/
VLAN/SHOW >vstats
/VLAN/SHOW >vport
/VLAN/SHOW >vrouter
/VLAN/CONFIG
8-4
VLAN Entries
CLI command:
/VLAN/SHOW >vport
/VBRIDGE/SHOW >fwt
/INET/SHOW >route
Useful CLI Commands
Displays the VLAN information.
Displays all Virtual Port statistics.
Displays all Virtual Port information.
Displays all Virtual Router information.
The following subcommands are available for VLAN
configuration:
•
ADDPORT
•
CREATE
•
DELPORT
•
DIABLE
•
ENABLE
•
MODIFY
•
MOVPORT
•
REMOVE
Draft Level—Hitachi Confidential
VLAN entry created:
Router Virtual Port id '33'
MAC entry with Port id '33'
Route entry with a directly
connected VLAN Interface type
US7070447-001, Rev 01