Table of Contents
Advertisement
HiSpeed Switch Troubleshooting Guide
Console Port
The console port has a DB-9 male connector used to connect a management
terminal to the switch by means of a straight-through DB-9 to DB-9 standard
serial port cable. Using a terminal, you can monitor the results of startup
self-diagnostics, perform manual boot configuration and SNMP agent
configuration, and customize your network using the supplied menus and screens.
The pin assignments for the console port are provided in Table 4-2.
Table 4-2.
Pins
The console port provides VT100 terminal emulation with the following
parameter settings:
Baud Rate: 9600
Data bits: 8
Stop bit: 1
Parity: None
Flow Control: None
Use the CLI commands
CONSOLE/SHOW
CONSOLE/CONFIG
4-4
Console Port Pin Assignments
Signal Name
1
Not Used
2
Transmit data (TD) to terminal
3
Receive data (RD) from terminal
4
Not used
5
Common signal ground
6
Not used
7
Not used
8
Not used
9
Not used
Draft Level—Hitachi Confidential
US7070447-001, Rev 01
Advertisement
Table of Contents
Troubleshooting
