Table of Contents
Advertisement
EN
54
Remote control
You may change your remote control setting to control
another receiver or to keep your receiver's remote
control from interfering with another receiver.
- Scroll to Set Code and press OK. A message is
displayed, prompting you to press OK on the new
remote control.
- Change your remote control setting as described in
Remote control setting and then press the OK key of
your new remote control within the next 2 minutes.
- If your receiver accepts the command, press OK
again to save the new setting and exit.
- If your receiver does not accept the command, a
failure message is displayed. Press the red color key to
make a new attempt, or press the green color key to
cancel and exit.
Parental Control
Parental Control is used to set locking options so as
to enable PIN code protection. Locking options include
locking access to the menu, locking access to individual
channels, and locking access to programs according to
their maturity rating.
Parental Control is also used to change your receiver
PIN code.
Access Control
Access control is used to enable locking options.
Set the appropriate access control level:
• Set Off to disable locking options; the PIN Code
will never be required.
• Set ON - High to enable all locking option; the
PIN Code will be required each time a protected
content is accessed.
• Set ON - Medium to enable all locks; the PIN Code
will not be asked more than once every 20 minutes.
• Set ON - Low to enable receiver locking only; the
PIN Code will be asked the first time a protected
content is accessed after waking up the receiver.
Maturity Level
Maturity level is used to set PIN code protection on
programs according to their maturity rating.
Set a maturity level from Age 3 or less to Age 17 to
prevent undesired access to programs for which maturity
rating is higher, or set Off to disable PIN code protection.
Advertisement
Table of Contents
