SAT HDTV Module
Receiver lock
Enable this option to protect the appliance against unauthorised access.
The next time you turn on the receiver, you will be prompted for the PIN (the fac-
tory default PIN code is 0000).
Menu lock
Activate this option if you wish to protect the menu against unauthorised access.
The next time you access the menu page, you will be prompted for the PIN (the
factory default PIN code is 0000).
Parental control
Use this option to set a minimum ager for certain programmes. These pro-
grammes will then require a PIN to be unlocked for watching.
Change device PIN
This is where you specify your personal PIN code. For security reasons, the
numerals you enter will be shown as # on the screen.
1. Press OK.
2. Enter the current PIN code and press OK to confirm.
3. Enter the new PIN code and press OK to confirm.
4. To avoid mistakes by typing errors etc. you will be asked to enter the new PIN
again and press OK to confirm. A message will tell you if changing the PIN was
successful.
82