Table of Contents
Advertisement
For instance, to prevent your 10 years old to watch a
non-suitable program, set the maturity rating to Age 10.
To access this program, you will be prompted to enter
your PIN code.
Access Timer
To temporarily disable locking, you may set an access
timer for a certain time period.
- Select Set a new timer.
- Set the timer settings as appropriate:
• Start Time, End Time: timer start and end time
• Frequency: timer repeat frequency
• Date
Channel Lock
To lock or unlock channels:
- Scroll to the channel you want to lock or unlock.
- Press OK to lock or unlock the channel. Locked
channels are marked with a cross.
Locking will take effect only if you activate the Channel
Lock option. Locked channels are locked in all the lists
they belong to.
PIN code
The PIN code default value is 0000.
To change your PIN code:
- Enter your new PIN code.
- Enter your new PIN code again.
Once you have changed your PIN code, keep it secret
to prevent others from using it. If you forget or lose
your PIN code, refer to the Troubleshooting.
Installation
Setup is used to
• install channels
• position your aerial - Test signal level and quality
• view information on your receiver
• manage software updates
• restore the receiver factory settings.
Access to this menu can be protected by Pin Code.
EN
55
Advertisement
Table of Contents
