Table of Contents
Advertisement
• If preferred audio not available: display
subtitles in case no audio track in your preferred
language is available
• Hearing impaired: enable subtitles specifically
intended for Hard-of-hearing people.
- Set your preferred Subtitle Language.
TV Settings
Set appropriate values for the following:
• TV Format: 4:3 or 16:9 Widescreen
• Display Format: defines the way the video
format is adapted, Letter Box (black bars at the
top and bottom or on the left and the right) or
Center Cutout (video cut on the left and right
or at the top and bottom)
The display format being managed by the receiver, set
you TV set to "full screen" or to the similar equivalent
setting (refer to your TV set user manual).
System Settings
Set appropriate values for the following:
• TV Scart: RGB, PAL CVBS, SECAM CVBS, or
S-VIDEO
• VCR Scart: PAL CVBS or S VHS
• Dolby Digital: On or Off
• TV audio: Mono or Stereo
• VCR audio: Mono or Stereo
• Default Volume: volume level at turn-on
• VCR control: Off, Prepare Record, or Record
Link. See chapter Advanced Settings
• Ext. Antenna Power Supply: select On if your
antenna requires power supply
Time settings
Set the appropriate time offset:
• Time offset: Auto (recommended) or from -12
to +12 hours
Sleep timer
You can set a sleep timer to automatically switch your
receiver to Standby mode after a given time lapse.
- To set a sleep timer, select the time lapse after which
the receiver should go to Standby (up to 3 hours).
- To disable a sleep timer, select Off instead of a time
lapse.
EN
53
Advertisement
Table of Contents
