Leveling The Bike; Moving The Bike; Before You Start - Schwinn a40 Owner's Manual

BEFOrE yOu STArT

Moving the Machine
The machine may be moved by one or more persons depending on their physical abilities and capacities. Make
sure that you and others are all physically fit and able to move the machine safely.
1. Remove the power cord (if equipped).
2. Use the Transport Handle to carefully lift the machine onto the
transport rollers.
3. Push the machine into position.
4. Carefully lower the machine into position.
NOTICE: Be careful when you move the elliptical. Abrupt motions can
affect the computer operation.
Leveling the Machine
The machine needs to be leveled if your workout area is uneven or if the Rail Assembly is slightly off the floor. To adjust:
1. Place the machine in your workout area.
2. Safely stand on the back of the Rail Assembly for approximately 20 seconds.
3. Step off the machine.
4. Loosen the locking wing nuts and adjust the levelers until they all contact the floor.
Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or
damage to the machine can occur.
5. Adjust until the machine is level. Tighten the locking wing nuts.
Make sure the machine is level and stable before you exercise.
16