Package Contents; Preparing The Host Computer - Sony SAITe1300-F Operating Instructions Manual

Package Contents

Preparing the Host Computer

After opening the package, make sure that all the following items are present.
Contact your dealer if anything is missing.
• S-AIT Tape Drive Unit (1)
• Air filter unit (1)
• Quick start guide (1)
• CD-ROM (1)
(containing this document, the quick start guide, and device drivers)
• SCSI terminator (1) (SAITe1300-S only)
Notes
• In addition to the above, other items may be included in the package.
• All the items included with the S-AIT Tape Drive unit are indicated on the
package.
Prepare the host computer before installing the S-AIT Tape Drive Unit.
1
Make sure that a SCSI host adapter card or Fibre Channel host bus adapter
(FC HBA) is installed in the host computer.
2
Install all the necessary software supporting the unit on the host computer.
For details about the software that can be used with the S-AIT Tape Drive
Unit and supported operating systems, contact your dealer.
18
Chapter 2 Installation