Unpacking; Checking The Package Contents - Sony StorStation LIB-81 Quick Start Manual

Unpacking

Notes
• The AIT library weighs approximately 13.5 kg
(29.8 lbs.). At least two people are needed in order to
handle the library. Handling the AIT library on your
own could result in back injury or other accidents
resulting in injury or in damage to the AIT library.
• You will need the box, packing materials and transport
screw if you wish to move or transport the AIT library
in the future. Retain them for future use.
1
Remove the AIT library from the box as indicated
on the box.
Remove the packing materials, such as plastic
covers and tapes.
2
Remove the transport screw (turn
counterclockwise) from the Shipping position
(upper hole) at the rear of the library, and then set it
in the Operation position (lower hole) with a screw
driver or coin.
Operation position
Checking the Package
Contents
After opening the package, make sure all of the
following items are present. Contact your dealer if
anything is missing.
• LIB-81 AIT library (1)
• Power cable (1)
• SCSI terminator (1)
• Quick Start Guide (this manual) (1)
• Air Filter (ACY-FL81) (4)
• Safety Notice (1)
• Bar code labels (1 sheet; only supplied with models
equipped with a bar code reader)
Note
In addition to the above, other documentation, cables,
and cleaning cartridges may also be included.
Download the Operating Instructions from the
Sony Web site.
http://www.sony.net/Products/storagesolution/
documents/manual_sony.html
Transport screw
Unpacking / Checking the Package Contents
GB
11