Basic Operations - Hitachi CP-X935W Operating Manual

Basic operations

To project the picture
3
1 Turn the MAIN POWER switch of the projector on.[ I : ON]
· The ON indicator will light up orange.
2 Press the STANDBY/ON button.
· The ON indicator blinks (green) during warm-up and then lights (green).
· Power cannot be turned on even if the STANDBY/ON button is pressed within 60 seconds after
power is turned off, since the lamp has cooled preparing for next lighting.
3 Remove the lens cap.
4 Adjust picture size using the projection lens ZOOM knob.
5 Adjust focus using the projection lens FOCUS ring.
6 Power on all connected equipment.
The method of connecting various equipment, see on the page 19~27.
7 Press the INPUT button or the INPUT SELECT (VIDEO or
RGB) button to select the source of the signal to be projected
on the screen.
· The selected signal input is displayed at the bottom right of the screen
for 3 seconds.
12
4
5
1
2
2
STANDBY/ON
INPUT
MUTE
POSITION ON
7
MENU
RESET
RESET
7
Example on-screen display
STANDBY/ON MUTE
FREEZE
MAGNIFY VOLUME
OFF
LASER
RIGHT
MENU ON MOUSE ON
BLANK TIMER
RGB VIDEO
INPUT
RGB1