Freeze Function - Hitachi CP-X935W Operating Manual

Basic operations (continued)

FREEZE FUNCTION

This function can display a still picture (by freezing). This function can
be used in combination with a MAGNIFY function.
1
Press the FREEZE button.
[TO RELEASE FREEZE]
2 Press the FREEZE button.
Note: When the FREEZE Button is pressed, FREEZE and RELEASE can function alternately.
Caution
A mark appears at the lower right of the screen for about 3 seconds during the FREEZE
function. Furthermore, a
FREEZE is released. What is more, FREEZE is released when an input selector button is
pressed or when the display mode of a personal computer is switched over during display.
MAGNIFYING FUNCTION
It is possible to display a partially magnified picture. This function can be used in combination with a
FREEZE function.
1 Press the MAGNIFY + button.
· By doing so, the center of the picture can be magnified as one
part, becoming double in size.
[TO CHANGE MAGNIFICATION]
2 Press the MAGNIFY + button.
· When the button is pressed, more magnification of display
takes place. (Maximum about 4 times)
3 Press the MAGNIFY - button.
· When the button is pressed, the magnified display reduces its
size. (Minimum about 1.1 times)
[TO SHIFT DISPLAY AREA]
4 Press the POSITION ON button.
5 Press the DISK PAD button up and down and left and right.
· The magnified display area shifts in the direction the button is pressed.
[TO RETURN TO NORMAL DISPLAY]
6 Press MAGNIFY OFF button.
Note: The MAGNIFY function is released when an input selector button is pressed or when the
Caution
display mode of a personal computer is switched over during display.
14
mark appears at the bottom of the screen for 3 seconds or so when
STANDBY/ON
FREEZE
1, 2
OFF
POSITION ON
RESET
MENU ON
STANDBY/ON
1, 2
FREEZE
MAGNIFY
6
OFF
POSITION ON
4
5
RESET
MENU ON MOUSE ON
BLANK
RGB
INPUT
MUTE
VOLUME
MAGNIFY
LASER
RIGHT
MOUSE ON
MUTE
VOLUME
LASER
3
RIGHT
TIMER
VIDEO