Assembly Instructions - Stamina 1405 Air Rower Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Install the PEDAL CAPS(52) by sliding the
SHAFT on the FRONT STAND(3) on both sides and secure with WASHERS(M10)(86) and NYLOCK
NUTS(M10x1.5)(81). Attach the back end of the LEFT and RIGHT PEDAL SUPPORTS(49, 50) to the
FRONT STAND(3) with BUTTON HEAD BOLTS(M10x1.5x25mm)(73), WASHERS(M10)(86), and NYLOCK
NUTS(M10x1.5)(81).
STEP 2
Attach the FRONT STAND(3) to the RAIL(1) with HEX BOLTS(M8x1.25x15mm)(76).
LEFT and RIGHT PEDAL SUPPORTS(49, 50) onto the
7
Shaft