Storage; Maintenance - Stamina 1405 Air Rower Owner's Manual

STORAGE

1. To store the 1405 Air Rower, simply keep it in a clean dry place.
2. To avoid damage to the electronics, remove the batteries before storing the 1405 Air Rower for one
year or more.
3. Move the 1405 Air Rower with the moving wheels on the Front Stand. Grasp the Rear Stand to move
the 1405 Air Rower. Do not use the Seat to move the 1405 Air Rower. The Seat will move and the
Seat Carriage may pinch your hand or fingers.
4. Follow the following process to fold the 1405 Air Rower as illustrated for easy storage.
a. Remove the PULL PIN(43) from the RAIL(1). Remove the LOCKING KNOB(44) from the
SUPPORT FRAME(4).
b. Move the SEAT(54) close to the back end of the RAIL(1) and fold the Fan Assembly backward.
c. Secure the SUPPORT FRAME(4) in folded position by inserting the PULL PIN(43) into the
RAIL(1). Screw the LOCKING KNOB(44) into the SUPPORT FRAME(4) for storage.

MAINTENANCE

The safety and integrity designed into the 1405 AIR ROWER can only be maintained when the 1405 AIR
ROWER is regularly examined for damage and wear. Special attention should be given to the following:
1. Sit on the SEAT(54) and pull on the HANDLEBAR(27) to verify that the Fan System provides resistance
and the Seat travel is smooth and stable.
2. Clean the roller tracks on the RAIL(1) with an absorbent cloth.
3. Verify that the CAUTION LABEL(93) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement CAUTION LABEL(93) if it is missing or damaged.
4. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5. Worn or damaged components shall be replaced immediately or the 1405 AIR ROWER removed from
service until repair is made.
6. Only Stamina Products supplied components shall be used to maintain/repair the 1405 AIR ROWER.
7. Keep your 1405 AIR ROWER clean by wiping it off with an absorbent cloth after use.
Fan Assembly
12