Table of Contents
Advertisement
11.20 Quick Compare
If you have not set any DVD writer to copy using function 11.5, the
function will be invalid. If function 11.5 is valid, you can set for the writer's
Tray
tray to close automatically after copying finishes. You can specify tray closure to
occur within 5 to 50 seconds.
11.20 Quick Compare
With the
Quick Compare
the copied target discs in increments of 1byte through 100MB.
11.21 Audio Burn Speed
Use the
Audio Burn Speed
will be recorded.
12 Advanced Setup (Adv Setup)
The
Advanced Setup
You should make changes only after you become completely familiar with the
functions in this menu. To enter
two (2) seconds.
12.1 UnderRun Protect
The
UnderRun Protect
default setting is
ON
12.2 Overburn
The
setting turns the Overburn function in the target drive on or off. The
Overburn
default setting is
OFF
12.3 Read Error Skip
The
Read Error Skip
disc.
If the setting is
OFF
the read error message.
If the setting is
ON
operation will be completed and the copy will include all errors detected during
the process.
The default setting is
20
function, you can specify a comparison of the source and
function to specify the write speed at which audio CDs
functions enable you to modify the system configuration.
Advanced Setup
setting turns Buffer UnderRun Protection on or off. The
.
.
setting controls error skipping during reading of the source
and an error is detected, the target drive stops and displays
, no messages will be displayed if an error occurs. The copy
.
OFF
mode, press the
TEAC Tower DVD Duplicator User's Manual
Auto Close
button for
ESC
Advertisement
Table of Contents
