Rear Panel; Figure 4. Rear Panel Of The Dvd Duplicator Unit - Teac DVW-D13 User Manual

Rear Panel

Figure 4 illustrates the rear panel of the DVD Duplicator unit.
cooling fan: Ball-bearing fans cool the DVD Duplicator.
AC voltage selector: Use this switch to select either 115VAC or 220VAC.
Caution: Before you turn on the power to the DVD Duplicator, make sure
the correct voltage is selected. Otherwise, you risk damage to the unit. The
default setting is 115VAC.
AC IN power connector: Connect the included AC power cable to this input
connector. Plug the other end of the power cable into a three-prong receptacle
AC power outlet.
Caution: Do not attempt to bypass the grounding plug. Otherwise, you risk
electrical shock or damage to the unit.
Note: To ensure proper operation, use only the original AC power cable with
your TEAC Tower DVD Duplicator unit.
TEAC Tower DVD Duplicator User's Manual
cooling fans
AC voltage
selector
AC IN power connector

Figure 4. Rear Panel of the DVD Duplicator Unit

Rear Panel
5