Figure 3. Lcd Control Panel - Teac DVW-D13 User Manual

Front Panel
LCD control panel: Use the control panel buttons to navigate through the
various functions viewed on the LCD display.
The DVD Duplicator control panel features an LCD display and four buttons.
These buttons are described in the following table:
Press the Up arrow button to scroll up functions or menus.
Press the Down arrow button to scroll down functions or menus.
Press the ENT (Enter) button to execute a selected function.
Press the ESC (Escape) button to cancel a selected function or to return to
the main menu.
target drives: Insert a blank disc into each target drive to make a copy of the
source disc. You can open the tray by pressing the eject button (if the tray fails
to open, you can use the emergency eject mechanism). You can close the tray
by pressing the eject button.
Note: TEAC strongly recommends that you do not push the tray in to close
it. Please press the eject button to eject or retract the tray.
power switch: Use the power switch to turn the power to the DVD Duplicator
unit on and off.
LED power indicator: The LED power indicator will be continuously lit
when the DVD Duplicator power is on
4

Figure 3. LCD Control Panel

.
TEAC Tower DVD Duplicator User's Manual