System Board; Removing The System Board - Dell Inspiron 500m Service Manual

Hide thumbs Also See for Inspiron 500m:
Table of Contents

Advertisement

Back to Contents Page

System Board

Dell™ Inspiron™ 500m Service Manual

Removing the System Board

 
CAUTION:
Before performing the following procedures, read the safety instructions in your Owner's Manual.
 
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
 The system board's BIOS chip contains the Service Tag, which is also visible on a barcode label on the bottom of the computer. The replacement kit for the
system board includes a CD that provides a utility for transferring the Service Tag to the replacement system board.
 
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
 
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
1.  Follow the instructions in
"Preparing to Work Inside the
2.  Remove the keyboard.
3.  Remove the
display
assembly.
4.  Remove the
palm
rest.
5.  Remove the
microprocessor thermal-cooling
6.  Remove the microprocessor.
7.  Remove the one M2.5 x 8-mm screw and one M2.5 x 4-mm screw labeled "circle B."
 
 
1
M2.5 x 4-mm screw
2
M2.5 x 8-mm screw
3
system board
 
Computer."
assembly.

Advertisement

Table of Contents
loading

Table of Contents