M2 X 5-Mm Screws; Top Cover - Dell Inspiron 500m Service Manual

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
1. Remove the keyboard.
2. Remove the display assembly.
3. Remove the display bezel.
4. Remove the three M2 x 5-mm screws that secure the display bracket to the top cover.
5. Lift the display bracket out of the top cover, and then remove the display latch.
NOTE: Ensure that the display bracket is upright when you replace the display latch.
1

top cover

2

M2 x 5-mm screws (3)

3 display bracket
4 display latch
Back to Contents Page