Removing A Floppy Drive; Installing A Floppy Drive - Dell Dimension 4700 Series Service Manual

Floppy Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
1. Follow the procedures in "Before You
2. Release and remove the front
NOTE: If you are adding a floppy drive, see

Removing a Floppy Drive

1. Disconnect the power and data cables from the back of the floppy drive and from the
2. Remove the floppy drive bracket
a. Remove the bracket-securing screw for the floppy drive.
b. Remove the bracket for the floppy drive from the computer.
3. Remove the floppy drive from the bracket:
a. Remove all four drive-securing screws (two on each side).
b. Remove the floppy drive from the bracket.

Installing a Floppy Drive

1. Remove the floppy drive bracket
Begin."
panel.
"Installing a Floppy Drive."
from the computer:
from the computer.
system board.