Tv Main Menu - Toshiba 15DV703R Owner's Manual

The TV Main menu has several menu options you can configure to suit your viewing preferences
Category Menu
Picture Picture Setting
Picture Preference
Picture Size
Blue Back
2
PC Setting*
3
DNR*
Auto Brightness Sensor
Reset
Sound NICAM
Bass
Treble
Balance
Surround
HDMI1 Audio
Reset
*1 Adjust this option if you use an NTSC 3.58 MHz or NTSC 4.43 MHz signal through one of the AV inputs, and "NTSC" or "Auto" has been selected for the AV
Colour option.
*2 This option can only be accessed when the input source is set to PC mode.
*3 In Component mode (except when using a 480i/576i signal), this option cannot be selected.
Option
Brightness Adjust the black level. This aspect determines the point where grays become
pure black.
Contrast Adjust the white level. This aspect determines how bright the brightest whites
should appear.
Sharpness Adjust the sharpness or softness of the display.
Colour Adjust the colour intensity.
1 Adjust the balance of the red, green, and blue colours in the display.
Tint*
Colour Temperature Adjust the level of white balance in the display. Available settings include:
• Cool – Picture appears with a bluish tint.
• Standard – Picture appears more white.
• Warm – Picture appears with a reddish tint.
Backlight Adjust the backlight level.
DynaLight Strengthen the black colouring of dark areas in the video according to the level of
darkness.
Select one of the four preset picture modes.
• Sports – High contrast display for clear-cut images.
• Standard – Picture is viewed in its original display mode.
• Movie – Picture quality is suited for viewing under dim lighting conditions to
deliver a "cinema" experience.
• Memory – When you adjust any of the items in the Picture Setting menu, this
mode is automatically applied.
You can choose from six picture formats to adjust the height/width ratio of the
display. See page 25 for more information.
You can set the TV to automatically switch the display to a blue screen and mute
the sound if the signal is weak or absent. Setting can either be "On" or "Off".
Hor Position Adjust the image position horizontally.
Ver Position Adjust the image position vertically.
Clock Minimize any vertical bars or stripes visible on the screen background.
Phase Adjust this option if the computer's display frequency has been set to 60 Hz. This
will optimize picture quality by eliminating flickering in the display.
Auto Adjust When individual adjustment of PC settings results in rough edges or flickering in
the picture display, select Auto Adjust to automatically adjust all settings to their
ideal position based on the current VGA signal.
DNR or digital noise reduction improves the picture quality by filtering out
unusable data ("noise") from a faulty input signal (e.g. a video film in letterbox
format or a noisy analog cable TV signal). Setting can either be "On" or "Off".
When the "Auto Brightness Sensor" feature is set to "On", the TV will
automatically optimize the backlighting levels to suit ambient light conditions.
Reset all Picture menu settings to their factory preset values.
Enable or disable the reception of NICAM stereo broadcasts. Setting can either
be "Auto" or "Off". See page 24 for more information.
Adjust the low-pitched sounds.
Adjust the high-pitched sounds
Adjust the sound balance between the left and right speakers.
When enabled, the audio signal is expanded to a wider listening field and made
deeper to output a pseudo surround sound from the TV speakers for a more
enjoyable viewing experience. This feature works with stereo signals from TV
broadcast or AV input. Setting can either be "On" or "Off".
Select the appropriate audio input when connecting an HDMI or DVI device to
HDMI1 jack.
Reset all Sound menu settings to their factory preset values.

TV Main menu

.
Description
29