Nicam; Two-Channel Sound Reception - Toshiba 15DV703R Owner's Manual

NICAM / Two-channel sound reception
The TV's built-in tuner can detect and receive NICAM stereo broadcasts.
NICAM stereo sound reception
1
2
3
Note: A bad reception
can cause disturbance
in the stereo sound.
In some cases, the
NICAM stereo sound
may not be received
correctly. In the case of
a two-channel sound
reception, press AUDIO
SELECT to switch to the
sound channel with the
better audio quality.
4

Two-channel sound reception

When a two-channel sound reception is available, press AUDIO SELECT to select
your preferred audio channel. Each time you press AUDIO SELECT, the sound
channel will switch between the two alternative channels available.
"NICAM M1 / M2" appears when a NICAM MONO A and MONO B broadcast signal
is received. Press AUDIO SELECT to switch between the sound channels.
24
Press TV/DVD to switch to TV mode, then press MENU.
/
Press to select "Sound", then press ENTER.
/
Press to select "NICAM", then
/
press to select the preferred
NICAM setting—"Auto" to enable
NICAM reception or "Off" if you want to
use standard mono FM audio
reception.
The following types of broadcast are possible with NICAM transmissions. The
display panel when a broadcast signal is received appears for approx. three
seconds.
• "NICAM ST" appears when a NICAM
STEREO broadcast signal is
received.
• "NICAM M1" appears when a NICAM
MONO A broadcast signal is
received.
• "NICAM M1 / M2" appears when a
NICAM MONO A and MONO B
broadcast signal is received.
• "NICAM Off" appears when a NICAM
signal is received and the NICAM
option is set to "Off".
Press EXIT to return to the normal screen.
Sound Sound