Connecting The Telephone Cable; Connecting The Mains Cable; Initial Installation - Philips HFC 325 User Manual

Thermosensitive fax
Table of Contents

Advertisement

Connecting the Telephone
Cable

Connecting the Telephone Cable

Connect the telephone cable to the device by inserting it in
the socket designated with LINE (RJ-11-Connector).
EN
Insert the telephone plug into your PTT line socket.
Telefonkabel anschliessen

Connecting the Mains Cable

Mains Voltage at the Site of Installation
Mains Voltage at the Site of Installation!
Check whether the mains voltage of your device
(indicated on the type label) matches the mains
voltage available at the setup location.
Connecting the Mains Cable
Insert the mains cable into the connection located on the
rear side of the device. Plug the power cable into the elec-
trical outlet.

Initial Installation

Selecting the Language
1 Use [ to select the desired display language.
2 Confirm with OK.
Selecting the Country
Setting the Country Correctly
Setting the Country Correctly!
You must set the country in which you are oper-
ating the device. Otherwise your device is not
adapted to the telephone network. If your coun-
try is not included in the list, you must select a
different setting and use the correct telephone
cable for the country. Consult your retailer.
Setting the Country
1 Use [ to select the country in which you are operat-
ing the device.
2 Confirm with OK.
After this input, the device prints a help page and checks
the telephone line.
8
CAUTION!
CAUTION!
Entering Number
Page Header
Your name and number are added together with date, time
and page number at the top edge of each fax transmission
(= header).
Entering Number
1 Enter your number. Using or – you can enter a plus
sign.
2 Confirm with OK.
Entering Name
Entering Name
1 Enter your name. You can enter characters using the
numeric keys (see key labels). Enter special characters
using 0. Press the respective key several times until
the desired character or special character appears on the
display.
Notice
Navigating in the Editor
You can move the cursor using [. Use C to
delete individual characters.
2 Confirm with OK.
After entering the device prints an overview of the func-
tions.
Philips · HFC 325

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents