To Delete All Values Stored In The Memory; Averaging Function - Omron BP742 Instruction Manual

USING THE MEMORY fUNCTION

TO DELETE ALL VALUES STORED IN THE MEMORY

The values stored in the memory are deleted by USER ID.You cannot partially delete
values stored in the memory. All values for the user you select will be deleted.
1. Press the START/STOP button to turn the monitor on.
2. Select your USER ID (A or B).
3. While holding the Down button (
than five seconds until the display appears as it does in the following illustration.
4. Press the START/STOP button to turn the monitor off.
NOTE: The monitor will automatically turn off after five minutes.

AVERAGING FUNCTION

The monitor calculates the average reading based on the three most recent sets of
measurement values taken within 10 minutes of the most recent reading.
), press the START/STOP button down for more
22