Door Sw Board - Sony DVP-CX777ES Service Manual

3-16. DOOR SW BOARD

1 screw (PTPWH 2.6 × 8)
2 gear (cam)
Precaution during the gear (cam) installation
1 Move the slider (pop-up) and the lever (pu joint) fully
in the direction of the arrow A .
slider (pop-up)
A
The levers of the two rotary switches on the door SW board
are shown in the illustration below.
3 screw (PTPWH 2.6 × 8)
lever (pu joint)
two rotary switches
door SW board
4 gear (B)
2 Install the gear (cam) in the direction shown
in the illustration and rotate it fully
in the direction of the arrow B .
3 When the gear (cam) happens to go too deep,
return it to the original position
in the direction of the arrow C .
DVP-CX777ES
5 two screws
(BVTP 2.6 × 8)
6 door SW board
B
gear (cam)
C
19