Table of Contents
Advertisement
OTHER FUNCTIONS
ASPECT MODE
When non HD component signal is received:
You may set different aspect modes to view the image with different signal formats.
You can change between four different modes including
Please do not watch TV at non full screen size, this may cause damage to your PRT.
Please see the following on each of four modes for details.
Suggested
aspect
mode
To switch aspect mode, please press the P.SIZE button when the word showing the corresponding aspect
mode will appear momentarily at the lower part of the screen. For example, set the current aspect mode to
4:3
as shown at the lower left side. If
the
P- cursor buttons to adjust the display position up and down before the words
P+
Scroll" disappears as shown at the lower right side.
When HD component signal is received:
Press the P.SIZE button to switch between two different modes including
Notes
1
The aspect mode will return to the mode of
conventional signal is received
2
In multi picture, pressing the P.SIZE button has no effect.
3
Using this special function (aspect mode) to change the size of image displayed for purpose of public
release or some commercial interests (i.e., change the ratio of height and width), this may infringe the
law of copyright.
For example:
Conventional TV
broadcast format
4:3 Zoom
is set as shown at the lower right side, you can press
16:9 (when HD signal is received ) or
) after completing the program selection and restarting the TV.
49
4:3 ,
4:3 Zoom and 16:9 ,
Signal sources
For example:
16:9 widescreen cinema
16:9 and 16:9Zoom .
16:9 Zoom .
For example:
signal transformed
from HD
4 : 3Zoom +3
hen
4:3 (w
Advertisement
Table of Contents
