Table of Contents
Advertisement
AV NET
4. Press the
cursor button to enter the Input item of
Custom option and then press the
select AV1.
Notes:
As for DVD, AVR, CD, STB, DVD2, AVR2, CD2 and STB2, you
can choose the Input from Off, AV1, AV2, AV3, AV4 or AV5.
As for VCR, CBL, VCR2 and CBL2, you can choose the Input
from Off, AV1, AV2, AV3, AV4, AV5 or TV(0P).
When using this function, the TV will switch to the AV1~AV5
mode automatically to the chosen Input item accordingly.
When using this function, the TV will switch to the program No.0
automatically if the Input item is set to TV (0P).
When using this function, the TV will remain the current state of
current if the Input item is set to Off.
5. Press the
cursor button to enter the Test/Learn item of
Custom option and the Learn is selected and shown in
green.
6. Then press the ENTER button to enter Learn state as
shown on the right. For example, you want to learn the code
of DVD player's
buttons to select the
7. Press the RECALL button, the
and the character "Learning" will appear on the lower left of
the screen. At this moment, put the remote control unit of
DVD player near to and face the screen center of the set and
press the
button on the remote control unit of DVD
player.
Notes
(1) You should press the
DVD player while the character "Learning" is displaying.
(2) Do not continue pressing the
cursor buttons to
button. Press the
item and the
will show green.
item will show yellow
button on the remote control unit of
button while learning.
cursor
40
Advertisement
Table of Contents
