Table of Contents
Advertisement
AV NET
8. The Succeeded will be displayed on the lower left
corner of the screen if you get pass, and the outer frame
of the
item will show yellow, indicating this item has
been passed.
The Failed will be displayed on the lower left corner of
the screen if you fail to pass. Please make sure your
operation right and re-do according to the above steps.
The Not Available will be displayed on the lower left
corner of the screen if the set is lack of enough internal
memory's capacities. Please refer to the note (2) to clear
up the items which are seldom used in order to release
the internal memory's capacities.
9. In order to check the AV NET function works properly, a test must be taken on the
succeeds. Press the ENTER button and the
will be output by the IR mouse. At this moment, the power of the DVD player will have corresponding action.
If not, please check the connection is right and re-study.
10. If you want to learn the other keys of the DVD player. Please refer to the above steps and operate according to
the hints on the screen.
11. You can control the DVD player by using the remote control unit of the TV after learning the related keys.
Usage: Press the AV NET button to enter the AV NET mode. Press the
and then refer to Using the AV NET function for more information.
Notes:
(1) The set can only learn and record remote codes of one of the external equipment. For an example, you learn the codes of
VCR2 after finishing learning the codes of DVD2, then the set will record the codes of VCR2.
(2) Please select the learned items in order to clear up their codes by pressing the CH /
internal memory's capacities. The outer frame of the reset items will recover white display.
(3) Since the compatibilities of the equipment, the remote codes of some equipment cannot be learned by the TV. This is normal.
item will show yellow about one second, the infrared signal
41
item after the learning
cursor buttons to select DVD2
button to release the occupied
Advertisement
Table of Contents
