Table of Contents
Advertisement
AV NET
Using the AV NET function
You can use the AV NET function if the test succeeded. The DVD player which is connected to the INPUT1
terminals is used as an example to illustrate how to use the AV NET function.
1. Press the AV NET button to display the menu as shown on
the right. Press the
you want to control the DVD player that is connected to the
INPUT1 terminals.
2. The TV will switch to the AV1 mode
pressing the
cursor button and the
simultaneously. Press the ENTER button, the
show yellow about one second. The IR mouse will output
infrared signal to turn on or turn off the DVD player's
power.
Note*:
The TV will switch to a corresponding mode automatically according
to the Input setting of the AV NET menu. As the example shows, the
set will switch to AV1 mode automatically because the Input setting
which corresponds to DVD item is AV1.
3. You can play the DVD by pressing the
buttons to enter the
Press the ENTER button, the
second and the IR mouse will output infrared signal to DVD
player, then the DVD player will play the disc.
4. As for the usage of the other function keys, please refer to the step 3 and operate according to the corresponding
hints on the screen.
Note
(1) Press the
operated by the cursor. At this point, if you press the cursor
control unit of the TV, they correspond to the
(2) Press the
menu.
(3) The IR mouse may output nothing when you press some buttons on the menu. This is normal.
(4) The TV provides some common function keys only for the external equipment of DVD, VCR, AVR, CD, CBL, STB, etc.
cursor buttons to select DVD if
automatically by
*
item shows green
item and the
item shows green.
item shows yellow about 1
cursor buttons to select the
cursor buttons to select the
item will
cursor
item, and then press the ENTER button to enter the button menu
, MENU , ENTER , RETURN buttons on the remote
, MENU , ENTER , RETURN buttons of DVD player.
item, and then press the ENTER button to enter the next button
38
Advertisement
Table of Contents
