Table of Contents
Advertisement
G
WARNING
Children could become trapped if they
activate the memory function, particularly
when unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
seat and backrest position
R
driver's side: steering wheel position
R
driver's side: position of the exterior
R
mirrors on the driver's and front-passenger
sides
Select key position 2 with the Start/Stop
X
button.
Adjust the seat (
page 86).
X
Y
On the driver's side, adjust the steering
X
wheel (
page 89) and the exterior mirrors
Y
(
page 90).
Y
Press memory button M and one of the
X
storage position buttons 1, 2 or 3 within
three seconds.
The settings are stored in the selected
preset position. A tone sounds when the
settings have been completed.
Memory function
Calling up a stored setting
Press and hold the relevant storage
X
position button 1, 2 or 3, until the seat,
steering wheel and exterior mirrors are in
the stored position.
i
The setting procedure is interrupted as
soon as you release the storage position
button.
93
Z
Advertisement
Chapters
Table of Contents
