Additional Speedometer; Permanent Display - Mercedes-Benz SLS AMG GT Coupe Operator's Manual

Menus and submenus
158
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the : or 9 button to select the
X
INST. CLUSTER INST. CLUSTER
Press a to confirm.
X
Press the : or 9 button to select the
X
Display Unit Speed-/Odometer: Display Unit Speed-/Odometer:
function.
You will see the selected setting:
miles miles.
Press the a button to save the setting.
X
Permanent display for outside
temperature or additional speedometer
The Permanent Display: Outside Permanent Display: Outside
Temperature/Speedometer Temperature/Speedometer
choose whether the multifunction display
shows the outside temperature or the speed
at the bottom right. The unit used in the
additional speedometer depends on the
display unit set (
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the : or 9 button to select the
X
Inst. cluster Inst. cluster
Press a to confirm.
X
Press the : or 9 button to select the
X

Permanent Display

Permanent Display
You will see the selected setting
Speedometer [km/h] Speedometer [km/h]
[mph] [mph] or Outside Outside Temperature
Press the a button to save the setting.
X
Lights
Switching the daytime running lamps on/
off
This function is not available in Canada.
If you have activated the
and the light switch is in the à position,
the daytime running lamps are switched on
automatically when the engine is running. If it
Settings Settings
submenu.
km km
allows you to
page 157).
Y
Settings Settings
submenu.
function.
or Speedometer Speedometer
Temperature.
Lights: Lights: function
is dark, the low-beam headlamps switch on
automatically.
In the dark, the following also light up:
the low-beam headlamps
R
the standing lamps
R
the tail lamps
R
the license plate lamp
R
the side marker lamps
R
Press the = or ; button on the
X
or
steering wheel to select the
menu.
Press the : or 9 button to select the
X
LIGHTS LIGHTS submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Lights: Lights: function.
You will see the selected setting:
or Disabled. Disabled
Press the a button to save the setting.
X
Setting the brightness for the display and
switches
You can use the
Switches: Switches: function to set the brightness of
the multifunction display and the switches in
the vehicle.
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the : or 9 button to select the
X
LIGHTS LIGHTS submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Brightness Display/Switches: Brightness Display/Switches:
function.
You see the selected setting
value of between 0 and 100.
Press the a button to save the setting.
X
Press the : or 9 button to increase
X
or decrease the brightness.
Settings Settings
Enabled Enabled
Brightness Display/ Brightness Display/
Settings Settings
Level Level with a